We are offering Genset Panel to our clients.
TECHNO AMF Relay which one monitoring and controlling the DG sets. It monitoring the mains power supply and starts the set when any one of the mains supply fails. And changeover by switching the contactor mounted in the panel. After the mains are restored the load will be removed from Genset and transferred to mains. The three independent CMOS monolithic power measurement device with a computation engine system measures the voltage, current, component of the network through all the three phase current and voltage. The wide 20 X 4 LCD showing all important parameters which one helps us to monitoring the load and engine details.
|Testing Result Duration||>24 Hours|
|Test Location||Customer Place|
|Scope of Testing||Electronic Circuit|
|Need Annual Testing Service||Yes|
|I Deal In||New Only|
|Feature||Robustness and High Functional Efficiency|
To meet the demands of clients, we offer a wide range of Thermal Scanning. These are extensively recommended by various numbers of clients owing to its robustness and high fucntional efficiency. our devices are engineered as per international industrial standards and using advance technologies. compact sized these devices are very easy to install and operate and available with us at budget friendly rates.
Thermal Scanning is helps us to visualize and quantify changes in the surface temperature of electrical Switchgear. An infrared camera converts infrared radiation (heat) emitted from the surface of electrical equipment into electrical impulses. These impulses are Spotted as colours which represent the various temperatures. Thermal Imaging identifies equipment flaws and pinpoints any hot spots often invisible to the naked eye. When parts of your electrical systems begin to have problems, they give off heat – usually a sign of electrical resistance or excessive friction. Abnormal temperatures can be seen easily.Before an electrical component burns up, it heats up. Early detection with Infrared Thermal Scanning detects growing problems before they cause a system failure or fire. Maintenance personnel can correct the problem before the component fails.
Infrared Thermography is used to perform inspections on electrical equipment because excess resistance on electrical apparatus indicates electrical faults such as:
Thermal scanning improves the safety of the asset under your control. Thermal imaging should be used as a vehicle to facilitate early detection of equipment failure: